Outdoor Christmas lights have to cope with rain, wind and long, dark evenings, so they need more thought than the set on the tree indoors. This guide covers matching the light to the spot, choosing a power source, what IP ratings mean, and how to measure up so the lights reach where you want them.
Match the light to the spot
- Rooflines, gutters and fences: icicle and waterfall lights hang in drops, so they suit long, straight edges. Our Christmas icicle lights come in 5m, 12m and 20m lit lengths for rooflines, fences, windows and conservatories. The outdoor waterfall curtain lights give a 2-metre cascade of warm white LEDs from a gutter or a garden tree.
- Trees, hedges and porches: cluster lights pack the LEDs closely together on the wire, which gives a dense, full look when wrapped around branches. The 1000 LED cluster lights have a 14.5m lit length, with smaller and larger sets in the same range.
- Paths and borders: stake lights push into the lawn or a flower bed to mark the way to the door. The LED branch pathway lights are a set of eight warm white branch stakes.
- Spots with no socket nearby: battery-powered lights can go on a balcony, gate or small tree without a cable running back to the house. Our remote control fairy lights have a rainproof casing and come with a remote for switching them on and off.
Mains, battery or solar?
Mains-powered lights give steady brightness all season, with no batteries to change. Some plug straight in; others run through a plug-in transformer. You will need an outdoor socket or a safe cable route from an indoor one, which usually decides how far into the garden they can go.
Battery-powered lights can go almost anywhere, such as wreaths, planters and gates. Check which batteries they take and whether they have a timer, which stops them draining overnight.
Solar lights charge in daylight and switch on at dusk. In a UK winter the days are short and often dull, so the panel collects less charge and the lights may run for fewer hours than in summer. For a display you want every evening in December, mains or battery power is more dependable.
IP ratings explained
An IP (Ingress Protection) rating tells you how well a product keeps out solids and water. It is written as IP followed by two digits: the first covers solid objects and dust, and the second covers water. The higher each number, the more protection.
- IP44: protected against solid objects larger than 1mm and against water splashed from any direction. This is the usual minimum for outdoor festive lights.
- IP65: dust-tight and protected against low-pressure jets of water.
- IP67: dust-tight and protected against temporary immersion in water.
Check what the rating covers: a plug, controller or transformer can have a different rating from the lights, and some must stay indoors or under cover with only the lit section outside. If a set has no outdoor rating, keep it indoors.
Lit length, lead length, colour and timers
Two lengths matter. The lit length is the part with LEDs on it. The lead length is the unlit cable between the plug and the first light. Measure the edge, tree or path you want to cover, then measure from the socket to where the lights should start. If the lead won't reach, use an extension lead made for outdoor use.
For trees, measure the height and how far round the widest part is, and decide whether to spiral the lights round or zigzag them up and down. Denser coverage needs more LEDs: our cluster lights run from a 7.2m lit length on the 480 LED set to 29m on the 2000 LED set.
Colour: warm white gives a soft, traditional glow. Cool white looks crisper and suits icicle and snow-themed displays. Multi-coloured sets are bright and cheerful. If you are combining sets, stick to the same white so they match.
Modes and timers: many sets offer several modes, from steady to twinkle and chasing; a steady setting is easier on neighbours facing your display. A timer switches the lights on and off at the same time each day, and a memory function keeps your last mode. Our icicle lights have an 8-hour timer with memory, and the branch pathway lights run for 6 hours on and 18 hours off.
Setting up outdoor lights safely
- Check every set for damaged cables, cracked casings or loose connections before putting it up, and don't use it if anything is damaged.
- Use sockets and extension leads designed for outdoor use, and plug into an RCD-protected socket or use a plug-in RCD.
- Keep plugs, transformers and connections off the ground and out of puddles.
- Only join sets together if the instructions say they are connectable, and don't swap transformers between different sets.
- Fix lights with clips made for gutters or fences rather than nails or staples, which can damage the cable.
- Avoid ladders in wind, ice or the dark, and have someone hold the ladder.
- When the lights come down, let them dry, coil them loosely and store them somewhere dry.
Questions & answers
Can I use indoor Christmas lights outside?
No. Only use lights labelled for outdoor use with a suitable IP rating. Indoor sets aren't built to keep out rain and damp.
Can outdoor Christmas lights stay out in the rain?
Lights rated for outdoor use, such as IP44, are made to cope with rain. Keep the plug and any transformer or controller where the instructions say, which is often indoors or under cover.
How many lights do I need for an outdoor tree?
There is no fixed rule. Measure the height and spread, decide how densely you want to wrap it, and compare that with the lit length of the set. It is easier to wrap spare length round the trunk than to stretch a set that is too short.
Compare lengths, colours and power options in our range of Christmas lights.